Full-spec, leather one-piece suit that makes a strong graphics statement
Meet the pinnacle product of the Quantum family: the Quantum 3 one-piece suit. It leads the pack in terms of design language, safety features, and overall sport style.
Evolution of graphics
The Quantum series is renowned for its bold, in-your-face, immediately recognizable graphics. This generation stays true to its roots. The Quantum 3 one-piece innovates through its design by drawing inspiration from 80s/90s digital screen visuals, think computer glitch graphics, and by exploring diverse colour styles and combinations across different variants. It also features the most outspoken colours available, setting it apart within the Quantum lineage.
Within its DNA
As a AAA-rated suit, the Quantum 3 one-piece leads the way in terms of materialization, fit, and features. Created with a symbiotic mix of Monaco performance cowhide, 3D air mesh, PWR|Shell stretch, neoprene (at the collar), and synthetic materials, these factors work together to enhance performance and comfort. Whether tucked in for a time attack on the track or going for a sporty road ride, the fitting shape is geared to move with the rider in every possible scenario.
Ready to race
The renewed outer armour (the hard parts) at the elbow, knee, and shoulder features a more aerodynamic appearance and comes as standard, along with internal Betac® protectors (at the elbows, knees, and shoulders), and SEESMART hip protectors. Increase the safety ante even further with the available SEESOFT back or divided chest protection, or with the Avertum Tech-Air® and Tech-Air® 5-compatible airbags (true to size).
Features
Speed hump
Comfort collar
The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cosy finish.
Comfort cuffs
Cuff zipper
The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.
Stretch at shoulders
Stretch at crotch
Stretch lips at shoulders
Stretch lips at back
Stretch lips at knees
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Stretch at waist
Stretch at inside arms
Stretch at armholes
Stretchable cuff
Stretch at calf
Wind catcher behind front zipper
Stretch at inside knee
Stretch at inside of legs
Stretch at ankle
The stretch at the ankle of this garment allows for more freedom of movement and comfort when being worn, as well as easy on/off.
Calf zipper for easy entrance
This garment has an easy entrance zipper at the calves to more comfortably suit up despite its snug race fit. Simply unzip for extra room when suiting up, then zip it up when you’re ready to go.
Visibility
Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Protective features
Dual comp knee slider type A
Dual-comp knee sliders type A are constructed from a high-performance TPU compound, combined with an extra durable PA6 compound. Specially designed for racers who want high-performance sliders, these higher-quality compounds offer good feedback, giving you maximum durability without compromising your feel on the road. The sliders come in a pair of two, each anatomically shaped to fit either the left or the right knee, and high-quality Velcro attaches the sliders to leathers, ensuring they stay where they need to. Type A sliders are available in three colours, to fit every colour combination of your leathers, and the dual-injected colours keep the design visible even when the sliders begin to wear.
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
TPU protection at shoulder
TPU protection at knees
TPU elbow sliders
Coccyx Protection
Pockets
Inner pocket
Ventilation
Ventilation panels on upper legs
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Perforation at upper arms
Ventilation panels on lower arms
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Ventilation panels on back side
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Perforation on upper back
Ventilation panels on lower legs
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Perforation on upper legs
Ventilation panels on shoulders
The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.
Ventilation panel on centre front
Outer shell
Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.
Perforated Monaco performance cowhide
The top-spec Monaco performance cowhide has been perforated for ventilation purposes.
Monaco performance cowhide
The top-spec Monaco performance cowhide has been used in this product.
3D air mesh
This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.
PWR|Shell stretch
Artificial Leather
A synthetic version of leather with a similar look.
Artificial nubuck
Lining
3D mesh
Removable lining
Mesh
Polyester stretch
Comfort-boosting liner with stretch built in.
Polyester ripstop
Polyester ripsotp is a lightweight fabric with special fibres used within the weave at specific points, allowing for the fabric to have strong resistance against further tears.
Insulation
Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Wind catcher behind cuff zipper
Wash & Care
Outershell
 |
Do not wash |
 |
Do not bleach |
 |
Do not tumble dry |
 |
Do not iron |
 |
Do not dry clean |
Warnings
| Make sure that your product is completely dry before you store it |
| Refer to the user manual |
| Spot clean with damp cloth |
| Use REV'IT! designated (leather) cleaning agents only |
Removable inner liner
 |
Machine wash 30°C, mild cycle |
|
Do not bleach |
|
Do not tumble dry |
|
Do not iron |
|
Do not dry clean |
Warnings
| Remove protectors before cleaning |
| Use mild detergent |
Protection
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
SEESMART CE-level 1 Hip Protectors - RV30
SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
BETAC® shoulder protectors "S" Type B-L1
This product includes the impact-absorbing BETAC® shoulder protectors "S" Type B-L1. “S” which stands for shoulders – the region of the body of which it protects, Type B referring to its surface area in which it covers (which is larger surface area in comparison to the Type A variant), and L1 which stands for CE-level 1 certification.
BETAC® elbow protectors "E" Type B-L2
This product includes the impact-absorbing BETAC® elbow protectors "E" Type B-L2. “E” which stands for elbows – the region of the body of which it protects, Type B referring to its surface area in which it covers (which is larger surface area in comparison to the Type A variant), and L2 which stands for CE-level 2 certification.
BETAC® knee protectors "K+L" Type B-L2
This product includes the impact-absorbing BETAC® knee protectors "K+L" Type B-L2. “K+L” stands for knee and lower leg– the region of the body of which it protects, Type B referring to its surface area in which it covers (which is a larger surface area in comparison to the Type A variant), and L2 which stands for CE-level 2 certification.
Prepared for Avertum Tech-Air® airbag system - TRUE TO SIZE
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - being true to size. This garment can be purchased in your usual size. The REV'IT! Avertum Tech-Air® Airbag wearable vest is designed to be worn under any proper fitting garment, keeping in mind that the garment must be large enough to accommodate the expansion of the airbag in the event of a crash. For those riders who want to wear a sports (leather) garment, the REV'IT! Avertum Tech-Air® Airbag may also be worn with Tech-Air® compatible (leather) garments which have built in (leather) expansion panels to accommodate the inflation of the airbag (these are marked with ‘PREPARED FOR TECH-AIR® AIRBAG SYSTEM’ on our website). These garments can be purchased in your usual size.
Certification
Fit
Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.
