Ventilated, textile and leather jacket for summer use
Meet the ventilated mesh and textile jacket component of the REV’IT! 'NINETYFIVE Capsule collection. Introducing the Swiftblade.
Its DNA
With a combination of various materials all working together, including mesh, softshell, ripstop, and leather, that’s what gives the Swiftblade jacket its unique composition. And because of the inclusion of open-structured mesh that creates large ventilation panels, it’s a ventilated summer jacket that you’ll want to be seen with! It keeps you both looking and feeling cool when heading to your next destination.
Setting it apart
At the upper chest of the left side, race-inspired laminated prints including RV95 - the year of REV’IT!’s birth, 1995 - #thefuturebelongstous, and our Shield logo, make it immediately recognisable as something that sets it apart from the rest of the collection. You’ll also see the text, “Ready and willing to ignite,” because that’s what we are and that’s what this jacket does. It’s ready to play. Subtle branding is also found at the upper backside of the jacket.
Features
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Protective features
3D mesh protector pockets
Adjustability
Adjustment strap at waist
Adjustment tab at cuffs
Pockets
Two slit pockets on front
Inner pocket
Lining
3D mesh
Mesh
Polyester ripstop
Polyester ripsotp is a lightweight fabric with special fibres used within the weave at specific points, allowing for the fabric to have strong resistance against further tears.
Outer shell
Softshell 3L
Buffalo leather
Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.
Artificial Leather
A synthetic version of leather with a similar look.
Polyester mesh
Ripstop 600D
Wash & Care
Outershell
 |
Machine wash 30°C, mild cycle |
 |
Do not bleach |
 |
Do not tumble dry |
 |
Do not iron |
 |
Do not dry clean |
Warnings
| Refer to the user manual |
| Remove protectors before cleaning |
| Wash inside out |
Protection
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
SEESMART CE-level 1 Elbow Protectors
SEESMART elbow protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Certification
This garment is Class AA certified according to standard EN 17092-3:2020
Fit
Regular fit
The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.
