Chain Paste 150ml

• Reduces rolling friction and loss of power.
• Improves transmission performance and increases chain service life.
• Retains its lubricant properties at very high temperatures.
• Water, salt and rust resistance, preventing corrosion.
• Protects O-rings, X-rings and Z-rings.
• Contains a solvent to eliminate old residue and to penetrate into the links.
• Compatible with all types of chain.
• Practical, cost-effective, not cumbersome and non-flammable.
• Easy to store under the seat of the bike.
• One 150ml tube allows about 10 applications.
• The chain must be cleaned with Motul Chain Clean prior to the use of Motul Chain Paste.
• Apply the paste and spread it on the whole length of the chain using the brush tip applicator.
• A small quantity of paste is enough to lubricate all the chain. Do not apply a thick layer of paste.
• Spread the paste on the whole chain and especially the inner parts until there is a thin and homogenous layer.
• Motul Chain Paste adheres completely after a few minutes.

Lubing a motorcycle chain using Motul Chain Paste is a straightforward process. Here's a step-by-step guide on how to do it:

You will need:

• Motul Chain Paste
• Motorcycle stand (optional, for easier access to the chain)
• Cleaning rag or cloth
• Latex or nitrile gloves (optional, to protect your hands)

Procedure:

1. Prepare Your Motorcycle:

   • Park your motorcycle on a level surface.
   • If available, use a motorcycle stand to lift the rear wheel off the ground, which makes it easier to access the chain.

2. Clean the Chain:

   • Before applying chain paste, it's essential to ensure that the chain is clean. If the chain is dirty, use a chain cleaner or degreaser to remove old lubricant and grime.
   • Allow the chain to dry completely before applying the chain paste.

3. Wear Gloves (optional):

   • While not mandatory, wearing latex or nitrile gloves can help keep your hands clean and prevent the paste from getting on your skin.

4. Apply the Motul Chain Paste:

   • Squeeze a small amount of Motul Chain Paste onto the outside of the chain.
   • Slowly rotate the rear wheel while applying a thin, even coat of paste along the entire length of the chain. Ensure the paste covers both the top and bottom of the chain.

5. Distribute the Paste:

   • Use a cloth or rag to spread the paste evenly across the chain by gently running the cloth along the chain while turning the wheel.

6. Let the Paste Set:

   • Allow the paste to set for a few minutes to ensure it adheres to the chain's surfaces.

7. Excess Paste Removal:

   • After the paste has set, use a clean part of the cloth to wipe off any excess paste. You want to keep the paste on the chain, not on your motorcycle or the surrounding area.

8. Inspect and Test:

   • Rotate the rear wheel by hand to ensure the chain moves smoothly. If you notice any buildup or excess paste, wipe it away.

9. Lower the Motorcycle (if on a stand):

   • If you used a motorcycle stand, carefully lower the motorcycle back onto its wheels.

10. Dispose of Materials:

    • Dispose of any used cloths or gloves properly, following environmental regulations.

It's essential to follow the specific instructions provided on the Motul Chain Paste product label as formulations and recommendations may change. Regularly lubricate your motorcycle chain according to your motorcycle's maintenance schedule and the recommendations in the Motul Chain Paste's product information. Proper chain maintenance helps extend the life of your chain and ensures safe and smooth operation.